SpaNet® PowerSmart Unversal Heat Pump 14kW
The most energy-efficient and cost-effective method of heating your spa or pool water:
- Works well on spas up to 8000 Litres*
- Compared to gas or electric heaters, a heat pump uses a tiny portion of energy to generate the same amount of heat output
- Using refrigeration technology, a heat pump only requires a small amount of energy to run a fan motor and compressor and can output over 5 times more energy in heat compared to what it consumes in electricity.
- The PowerSmart heat pump will use around 75% less energy than a standard electric spa heater and 55% less energy than natural gas
Eco-friendly -does not cause ozone depletion and achieves higher performance with reduced power usage
- Unlike other refrigerants, R410A does not cause ozone depletion and achieves higher performance with reduced power usage
Corrosion Resistant:
- 100% rust-proof plastic enclosure with superior UV resistance and a modern design style
- By producing the heat exchanger coil from Titanium and exchange tank from PVC corrosion resistance is maximised to commonly used spa and pool chemicals such as lithium, bromine, ozone, iodine, salt, chlorine.
Smart Control with Timers
- Ensures the process of checking the temperature and adjusting settings is comfortable and easy to read without needing to crouch or bend down to the side of the unit
- The smart control micro-processor manages heat only, cool only, or automatic temperature modes, onboard diagnostic information, self-diagnosis error codes
- Features two sleep timers so the user can program sleep periods to take advantage of off-peak power periods or to prevent operation during certain times of day.
Benefits of low power consumption
- Consumes such little power of reduced heating times due to the larger 6.0/8.3/14.0kW heating output, and you can spa for longer because there is sufficient power available to run the heat pump whilst a jet pump is running.
All Seasons operation & EEV
- Comes with an automatic defrost protection allowing operation throughout all seasons even in low ambient temperatures (<5oC).
- If the environmental temperature is too low and the air is very humid and cold, automatic defrost control will be activated when necessary to maintain optimal heat pump performance
- accurately according to ambient temperature variation, making the energy efficiency 10%-30% higher.
- Features an electronic expansion valve (EEV) to control the refrigerant flow
PRODUCT SPECIFICATIONS
Cabinet Dimensions: 1120 x 480 x 840 mm Net weight: 90.kg
POWER:
- Power Supply: 220-240V AC/1PH/50Hz Heating Capacity: 14.0kW
- Heating Input: 2.6kW Cooling Capacity: 9.7kW
- Running Current Heating: 12.8A COP: 5.5 | EER: 3.6kW
- Heating Test Conditions: Ambient Temperature=24ºC, Water Temperature=27ºC
- Cooling Test Conditions: Ambient Temperature=32ºC, Water Temperature=27ºC
WATER:
- Recommended Pool Volume: Over 5000L Minimum Water Flow: 8.0 m³/hr
- Water Temp Range: 10ºC to 40ºC Outlet connectors: 40mm PVC
ENVIRONMENTAL
- Sound level: 52dB(A) Refrigerant: R410A
- Operating Temp Range: 0ºC to 40ºC Protection Class: 1
- Waterproof Class: IPx5 Fan Speed: 950RPM
- Heat Exchange: Titanium + PVC
- Model: SHP-140P
- Manufacturer: SpaNet®
Still not sure this is the correct part? Contact our part experts
ELECTRICAL NOTICE
Can't find what you are looking for? Use our Al assistant to get more information on our products and services.