pH Tester / Salinity Tester and Temperature Probe All in One

SKU: AQDT

Your Price : $99.00
Why Pay : $109.00
You Save : $10.00 (9%)
In Stock
Buy Now, Pay Later zipPay more info »

Afterpay Logo Pay over 4 $24.75 fortnightly payments. 0 Interest. More info



Calculate Shipping

Free shipping on orders $149+.

*Excludes spa covers, heat pumps, umbrellas, saunas, pergolas, fire tables and dangerous goods.



All in One pH Tester / Salinity Tester and Temperature Probe

 

  • No more spending $$$ on expensive test strips or struggling to read the colours!
  • Accurately measure your spa and pool pH and salinity with the AQ pH tester
  • Get your spa and pool water pH just right for the best bathing experience

 

The AQ PH tester is a simple battery-powered device that enables you to accurately test your PH levels in a spa or swimming pool. Unlike budget pH testers on the market, the AQ pH tester can be calibrated, enabling you to get the most accurate readings. This means you can consistently get your spa and pool water pH just right.

 

Specifications

  • Powered by 3 x LR44 Button batteries
  • pH level testing
  • Salinity measurement
  • Accurate Temperature measurement
  • Backlit for easy reading
  • Waterproof test probe
  • Comes with 6 x calibration solutions (Valued at $29)

 

How to calibrate for pH

The AQDT digital tester comes with two sets of pH calibration sachets. To calibrate your tester, dissolve each sachet in water in a small container, following the instructions that come with the unit. 

Then follow the steps below;

 

1. Dissolve one of each of these sachets into a separate container of water. (The sachet should state on it how much water in each container - I believe it is 250ml - 1 metric cup, but ensure you follow directions on the sachet)

 

2, Turn the unit and tap the down button 'Mode/Cal' until it shows up 6.86 which is the first solution of dissolved buffer powder to test.
3. Remove the cover from the end of the unit and dip the electrode into the container of water that you have dissolved the 6.86 buffer powder
4. Hold the down arrow button 'Mode/Cal' for 6 seconds. When it flashes 3 times it has calibrated.
5. Tap the down button 'Mode/cal until it shows up 4.00
6. Dip electrode into container with 4.00 sachet dissolved in water
7. Hold the down arrow button 'Mode/Cal' for 6 seconds. When it flashes 3 times it has calibrated.
8. Tap the down button 'Mode/cal until it shows up 9.18
9. Dip electrode into container with 9.18 sachet dissolved in water
10. Hold the down arrow button 'Mode/Cal' for 6 seconds. When it flashes 3 times it has calibrated.  
 
That will complete the calibration for pH levels.
 
Conductivity calibration is done at the factory and should not need to be done again. If you do wish to re-calibrate, you will need to purchase the following calibration solutions separately;
 
 
Replacement pH calibration / buffer powder sachets are available here;

 

 

Dimensions: 21cm x 8cm x 5cm

Model: AQDT

Manufacturer: AQ

Sold Individually

 

 

(AQDT)

SKU AQDT
Model # AQDT
Barcode # 9352861005191
Shipping Weight 0.2500kg
Shipping Width 0.190m
Shipping Height 0.050m
Shipping Length 0.180m
Shipping Cubic 0.001700000m3
Chemical System Chlorine System
Chemical System Chlorine Free System
Chemical Type Test Strips
Chemical Type Water Balance
Accessory Brand UConnect
Type Purifier

Others Also Bought



More From This Category


pH Tester / Salinity Tester and Temperature Probe All in One
Waterco V-Pump Submersible Water Pump
Waikiki Stainless Steel Outdoor Shower - 10 year warranty
Poolstar 40L Solar Shower With Foot Shower
SKU: P2606-FTBX

Poolstar 40L Solar Shower With Foot Shower

Now $499.00

On
Sale