Edgetec® Enhance Heated Spa Bath Blower
NewSKU: E-3700
Pay over 4 $154.50 fortnightly payments. 0 Interest. More info
Notify me when back in stock
Edgetec Enhance Heated Spa Bath Blower
Air Switch controlled, Variable Speed, built-in heater.
All spa blowers require a Sanitiser cycle by law.
- Blower has a built-in air release output which will stop the motor from burning out when only a small amount of air is needed in the bath
- 220-240volt, Motor 600W, Heater 400W
- 64db@ 1meter, Amps 4, IPX5,
- 40mm outlet Push Air Button
- 1: High 2: Med 3: Low 4: Ramping 5: Off
Sanitiser Cycle:
By law, a spa bath used in a bathroom needs to have a sanitiser cycle.
This blower is compliant and turns on the blower 10 minutes after shutdown and runs for 20 seconds to purge any water sitting in the lines so that it does not become stagnant.
Please note: If your blower has failed, one of the main causes is a defective non-return valve and you should consider replacing that. It will stop the water from slugging the new blower. Warranty does not cover blower issues caused by water ingress.
DETAILS:
Manufacturer: Edgetec
Model: E-3700/
Power Rating: 1 HP
Dimensions:
Height: 190mm
Length: 270mm
Width: 160mm
To be fitted by a qualified electrician, pool, or spa technician only. Spa Store will not be liable for incorrect installation, damage, or injury caused by an unqualified person installing this part.
Selection Tips
- Check your model
- Check your part number
- Check Spa type
(E-3700)
SKU | E-3700 |
Model # | E-3700 |
Shipping Weight | 5.0000kg |
Shipping Width | 0.300m |
Shipping Height | 0.300m |
Shipping Length | 0.350m |
Shipping Cubic | 0.031500000m3 |
Blower Brand | Edgetec |
Blower Power Rating | < 1Hp |