Davey Spa Quip® SP601 Complete Kit 1.5kw (Oval Touchpad)

• Comes complete with controller and touchpad
• In heater temp sensor
• Max Temp 41 degrees
• Adjustable Filtration
• Programmable Load Shedding

Controller Specifications                  Controller Dimensions                 Touchpad Dimensions
Heater Wattage: 1500w                       Length: 360mm                                Face Size – Length: 112mm
Max Current: 10amp                            Height: 220mm                                Width: 49mm
Power Lead: 10amp C-38                    Width: 95mm                                   Depth: 4mm              
Power Lead Length: 5m                       Weight: 3.8kg                                  Hole Size – Length: 88mm
Heater Unions: 50mm                          Touchpad Lead Length: 3.0m          Width: 23mm

SP601AU-15 240volt Output Sockets                                               SP601AU-15 Low Voltage 
PUMP 1: 1Spd Pump or 2Spd Pump                                                    1 x Touchpad Outlet
AUX: 1spd Pump or single-speed blower                                             1 x Light
SPVSB: Davey Variable Speed Blower only                                         1 x SPVSB
Circ Pump: Circulation pump                                                                1 x In pool temp sensor
O3/UV: This outlet is only to be used with an ozone system

If connected to a 2 speed pump:-

Davey variable-speed blower is the only blower that will work.

Need to purchase a SP601 time clock

           http://www.spastore.com.au/davey-spa-quip-sp601-with-time-clock: for circulation pump to not run 24/7  

For a Laing circulation pump - Heater element inserts are needed; will work only on the 1.5kw and 2kw models.

Please note that this controller requires AMP connectors. You might need to purchase new leads if your equipment does not have leads with AMP connectors. These are not included. See these leads:

AMP Blower Lead

Single Speed Pump Lead

Twp Speed Pump Lead

UV Ozone Splitter. This is required if you are using UV and ozone.

To be fitted by a qualified electrician, pool or spa technician only. Spa Store will not be liable for incorrect installation, damage or injury caused by an unqualified person installing this part.

Selection Tips

• Check your model
• Check your part number
• Check Spa type

Important Electrical Notice: