Davey Spa Quip® SP500 Controller Only 2.0kw
No keypad.
System is sold complete with:
- Heater/Control Box
- 2 pcs 40mm unions
- T piece body
- Also available in 1.5kw
- THIS PRODUCT IS MADE IN AUSTRALIA
Controller can be set up in the following configurations:
1.) 1 X 1spd pump, 1 X Blower (STANDARD BLOWER)
2.) 1 X 1spd Pump, 1 X 12volt light transformer
Details:
Power Rating: 15amp 2.0kw
Please note that this controller requires AMP connectors. You might need to purchase new leads if your equipment does not have leads with AMP connectors. These are not included. See these leads:
UV Ozone Splitter. This is required if you are using UV and ozone.
Spa Controller Fault Reset Procedure
To be fitted by a qualified electrician, pool or spa technician only. Spa Store will not be liable for incorrect installation, damage or injury caused by an unqualified person installing this part.
Selection Tips
- Check your model
- Check your part number
- Check Spa type
Still not sure this is the correct part? Contact our part experts.
Important Electrical Notice:
(Q500AUS-20)
| SKU | Q500AUS-20 |
| Model # | Q500AUS-20 |
| Shipping Weight | 3.0000kg |
| Shipping Width | 0.600m |
| Shipping Length | 0.400m |
| Controller Brand | Davey Spa Quip® |
| Control Type | Controllers |
