Davey Spa Quip® SP1200 Complete Kit 3.5kw

Davey Spa Quip® SP1200 Complete Kit 3.5kw

• Rated up to 40amp single phase MAX but can be lowered depending on the power draw of the items plugged into the controller
• Can also be set up with a 3phase power connection
• Standard 12V DC output
• Specialized features to run various pumps, blowers and heaters
• Commonly used on Monarch Spas
• Ideal for large spas pools & swim spas
• Complete with: Heater/Control Box, 2 X 50mm unions and touchpad
• **THIS PRODUCT IS MADE IN AUSTRALIA**

This Controller can be set up in the following configurations:

High Voltage AMP Sockets:

(1) Pump 1A (one or two speed pump) Pump 1B (single speed pump, this socket can't be used if socket 1A has a two speed pump fitted).

(2) Pump 2A (one or two speed pump) Pump 2B (single speed pump, this socket can't be used if a two speed pump is fitted to socket 2A)

(3) AUX Output (this socket can run a blower or pump)

(4) SPVSB (this socket can only be used for a Davey Variable speed blower) Circ Pump Socket, Ozone Socket

Low Voltage Sockets inside controller:

(1) 2 X Touch pad sockets

(2) 4 X Davey LED light sockets

(3) 1 X in pool temp sensor socket

(4) 1 X 12volt light Output

Please note that this controller requires AMP connectors. You might need to purchase new leads if your equipment does not have leads with AMP connectors. These are not included. See these leads:

AMP Blower Lead

Single Speed Pump Lead

Twp Speed Pump Lead

UV Ozone Splitter. This is required if you are using UV and ozone.

Details:

Manufacturer: Davey Spa Quip

Model: Q1200S-35KIT

Sold individually

Spa Controller Fault Reset Procedure

To be fitted by a qualified electrician, pool or spa technician only. Spa Store will not be liable for incorrect installation, damage or injury caused by an un qualified person installing this part.

Selection Tips

• Check your model
• Check your part number
• Check Spa type

Important Electrical Notice: