Davey Spa Quip® SP1200 Complete Kit 3.5kw

• Comes complete with controller and touchpad
• In heater temp sensor
• Max Temp 41 degrees
• Adjustable Filtration
• Sleep Timer
• Programmable Load Shedding

Controller Specifications                Controller Dimensions              Touchpad Dimensions
Heater Wattage: 3500w                     Length: 310mm                            Face Size – Length: 172mm
Max Current: 40amp                          Height: 360mm                            Width: 91mm
Power Lead: Hard Wired                   Width: 95mm                                Depth: 5mm
Power Lead Length: N/A                   Weight: 4.2kg                                Hole Size – Length: 135mm x Width: 65mm
Heater Unions: 50mm                       Touchpad Lead Length: 3m

SP1200-35 230volt Output Sockets                                            SP1200-35 Low Voltage 
PUMP 1A: 1Spd Pump or 2Spd Pump                                           2 x Touchpad Outlet
PUMP 1B: 1Spd Pump (Cannot use if pump 1A is 2Spd)              4 x Light (Davey lights only)
PUMP 2A: 1Spd Pump or 2Spd Pump                                           1 x 12v AC light output
PUMP 2B: 1Spd Pump (Cannot use if pump 2A is 2Spd)              1 x Variable Speed Blower Outlet
AUX: 1Spd pump or single-speed blower                                      1 x In Pool Temp Sensor
SPVSB: Davey Variable Speed Blower only
Circ Pump: Circulation pump (24hr)
Ozone: This outlet is only to be used with an ozone system

(1) Pump 1A (one or two-speed pump) Pump 1B (single-speed pump, this socket can't be used if socket 1A has a two-speed pump fitted).

(2) Pump 2A (one or two-speed pump) Pump 2B (single-speed pump, this socket can't be used if a two-speed pump is fitted to socket 2A)

(3) AUX Output (this socket can run a blower or pump)

(4) SPVSB (this socket can only be used for a Davey Variable speed blower) Circ Pump Socket, Ozone Socket

Low Voltage Sockets inside controller:

(1) 2 X Touch pad sockets

(2) 4 X Davey LED light sockets

(3) 1 X in pool temp sensor socket

(4) 1 X 12volt light Output

Please note that this controller requires AMP connectors. You might need to purchase new leads if your equipment does not have leads with AMP connectors. These are not included. See these leads:

AMP Blower Lead

Single Speed Pump Lead

Twp Speed Pump Lead

UV Ozone Splitter. This is required if you are using UV and ozone.

Spa Controller Fault Reset Procedure

Details:

Model: Q1200S-35KIT

Manufacturer: Davey Spa Quip

Sold individually

To be fitted by a qualified electrician, pool, or spa technician only. Spa Store will not be liable for incorrect installation, damage, or injury caused by an unqualified person installing this part.

Selection Tips

• Check your model
• Check your part number
• Check Spa type

Important Electrical Notice: